TM 9-2320-273-20
FUEL AND AIR INTAKE SYSTEM.
4-25. AIR CLEANER ASSEMBLY MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL OF FILTER ASSEMBLY.
1. Turbo air inlet pipe (7).
Loosen clamp (6). at filter dis-
charge and remove inlet pipe.
2. Restriction indicator tube (3).
Disconnect flare nut (4) from
elbow (5).
3. Air intake pipe (15).
Loosen clamps (17) and slide
boot (16) off air intake pipe (15).
4. Four nuts (11) and four
Remove from three studs (8)
Iockwashers (10).
and bolt (9).
5. Filter assembly (1).
Remove.
B. REMOVAL OF BRACKETS AND FITTINGS (REPLACEMENT OF UNIT ONLY).
6. Two capscrews (12) and two
Remove.
nuts and Iockwashers (13).
7. Two brackets (14).
Spread and remove.
8. Nipple filter (2).
Remove with elbow (5) attached.
LEGEND:
1.
FILTER ASSEMBLY
2.
NIPPLE FILTER
3.
RESTRICTION
INDICATOR TUBE
4.
FLARE NUT
ELBOW
5.CLAMP (2)
7.
TURBO AIR INLET
PIPE
8. STUD (3)
9.
BOLT
10. LOCKWASHER (4)
11.
NUT (4)
12. CAPSCREW (2)
13. NUT AND
LOCKWASHER (2)
14.
BRACKET (2)
15.
AIR INTAKE PIPE
16.
BOOT
17.
CLAMP (2)
TA 074631
4-81
