TM 5-2330-361-14&P
the inner cap screws if the inside as-
4-50. SIZE MATCHING.
sembly needs changing.
a. Tires through 8.25 (8-22.5 tubeless). Tire
differences of not more than !4 in. (6.35 mm) in di-
4 - 5 7 . MOUNTING AND REMOUNTING TIRES ON
a m e t e r or in. (19.1 mm) in circumference are
allowed.
DISC WHEELS.
b . Tire size 9.00 (10-22.5 tubeless) and larger.
Tire differences of not more than in. (12.7 mm) in
diameter or 1 in. (38.1 mm) in circumference are
allowed.
N O T E : The smaller of the two tires should be
mounted on the inside.
4 - 5 1 . TIRE MEASUREMENT.
4 - 5 2 . Measure the circumference of the tire with
an endless tape after being placed on the rim and
inflated, but not mounted on the trailer (see figure
4 - 1 2 ) . A straightedge, square or string gauge can
be used to check the tires mounted on the trailer
T h e dimension between the
(see figure 4-13).
straightedge and the tires should not exceed of
the allowable difference in diameter.
4-55.
R E M O V I N G TIRE AND DISC WHEEL AS-
SEMBLIES.
4-56.
With
the
trailer
supported
by
jades and blocked, loosen and remove
outer cap nuts (see Figure 4-15). Remove
t i r e a n d d i s c w h e e l . Loosen and remove
FIGURE 4-12. MEASURING TIRE WITH
ENDLESS TAPE.
FIGURE 4-13. USE OF TIRE STRAIGHT
FIGURE 4-11. RESULT OF UNDER
EDGE.
INFLATED TIRES.
Change 3 4-6