TM 5-2330-325-14&P
This task covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Personnel Needed: 2
Trailer parked on level ground, brakes engaged
and wheels chocked.
Materials/Parts:
Decking board
Tools/Test Equipment
General Safety Instructions:
Tool kit, mechanics general
Keep hands or feet free around area when
NSN 5180-00-177-7033
holding boards.
Shop equipment, common No. 1,
NSN 4910-00-754-0654
a.
Removal.
(1)
From under the trailer, remove nut (4) and clip (5) from screw (2).
(2)
Using soft head hammer, drive out screw (2) from board (3).
(3)
Repeat steps (1) and (2) for other nuts, clips, and screws in boards.
(4)
Remove old board (3) from deck (1).
b.
Installation.
WARNING
Note approximate location where holes will be drilled in boards. Do not place
hands or feet in this area when holding boards. Serious injury may result if drill bit
contacts hand or foot.
(1)
Install new boards (3) in deck (1). Check for proper fit.
