TM 5-2330-325-14&P
4-70.
FLOOR BOARD REPLACEMENT (Continued).
NOTE
The trailer decking material is Apitong. It is a very dense wood and is
difficult to cut or drill. Special tools may be required if cutting or drilling of
replacement Apitong boards is required.
(2)
Using an electric drill and bit, drill holes in board (3).
(3)
Using hammer, drive screw (2) in board (3) as far as possible. Repeat for remaining holes.
(4)
Install clip (5) and nut (4) on screw (2). Tighten until head of screw (2) is fully seated.
Repeat for rest of clips, screws, and nuts.
FOLLOW-ON TASKS:
None.
4-101
