TM 5-2330-325-13&P
0081
DISASSEMBLY
Remove all fittings from lift cylinder.
END OF TASK
INSPECTION
Inspect fittings for damage and replace as needed.
END OF TASK
ASSEMBLY
Install all fittings onto lift cylinder.
END OF TASK
INSTALLATION
WARNING
Each lift cylinder weighs 350 lb (158.75 kg). A lifting device rated at 500 lb (226 kg) and an
assistant may be needed to perform this task. Use extreme caution when handling lift
cylinder. Provide adequate support and use assistance during procedure. Failure to comply
may result in death or injury to personnel. Seek medical attention in the event of an injury.
CAUTION
Do not use a chain to restrain movement of piston as a chain may score or damage piston
surface. Failure to comply may result in damage to, or destruction of, equipment
or mission.
1.
Using a suitable lifting device securing upper portion of lift cylinder and a second securing device around lift
cylinder piston, position lift cylinder (Figure 3, Item 2) onto gooseneck so that end of piston is located
between lugs of base plate and secure with pin (Figure 3, Item 1), washer, bolt, and nut.
2.
Work upper portion of lift cylinder (Figure 3, Item 2) into position so that upper lift cylinder pin
(Figure 3, Item 1) can be driven through lift cylinder hangers and lugs. Secure pin with bolt, washer, and nut.
3.
Remove suitable lifting device and securing device from lift cylinder.
4.
Repeat for other lift cylinder.
0081-4
02/13/2013root(maintwp)wpno(M1049)
