TM 5-2330-325-13&P
0005
PAYLOAD CONFIGURATIONS - Continued
Table 2 provides information concerning some equipment combinations. The table indicates if the criteria
for a divisible load of 80,000 lb (36,287 kg) max GVW has been met. A "NO" in this column indicates that
the combination exceeds the divisible load criteria and may not be permitted under state and Federal
guidelines. All combinations except the D7G/1150E combination are within the capability of the
semitrailer, however, and may be able to be transported in countries with less stringent weight
requirements. The D7G/1150E combination cannot be transported on this semitrailer.
Check height of payload/semitrailer combination. Overall height exceeding 13 ft 6 in. (4.12 m) may
require permits and special routing.
NOTE
Table 2 provides examples only.
Table 2.
Common Equipment Combination Payload Information.
PAYLOAD
TOLERANCE
GROSS VEHICLE WEIGHT
DIVISIBLE
COMBINATION
(GVW)
LOAD
CRITERIA MET
AXLE
KINGPIN
EBFL/4000
OK
OK
94,166 lb (42,713 kg)
NO
1150E/4000
OK
OK
96,369 lb (43,712 kg)
NO
1155/4000
OK
OK
99,046 lb (44,927 kg)
NO
TRAM/4000
OK
OK
107,982 lb (48,980 kg)
NO
1155/1150E
OK
OK
112,850 lb (51,188 kg)
NO
D7G/1150E
OK
135,100 lb (61,280 kg)
NO
NO (1)
Note: (1) Exceeds semitrailer axle tolerance by 17,000 lb (7,711 kg).
Configuration Examples
The payload configuration for the semitrailer is determined by the operational requirements and the
loading information provided in the previous section.
Some examples of typical payload configurations are shown in (Figures 2 through 4).
