M1070 HET ARMOR KIT
II113400
Rev. D
a. Installation
1. Install seat armor panel as follows (see Figure 3-88):
a. Install seat armor panel (1) onto the driver's-side seat support bracket.
b. Install the driver's seat assembly (retained from Teardown, Chapter 2) per TM 9-2320-360-2.
c. Align holes in seat armor panel (1), driver's side seat support bracket, and driver's seat assembly and
secure all three with original four bolts and washers (retained from Teardown, Chapter 2) and new
locknuts (2). Torque locknuts to 20 lb-ft.
INSTALLATION 3-180
JUNE 2005