M1070 HET ARMOR KIT
II113400
Rev. D
2. Pre-assemble escape hatch panel as follows (see Figure 3-85):
a. Install four escape hatch catches (1) onto escape hatch panel (2) and secure each with two screws (3) and
locknuts (4).
NOTE
The Destaco clamps may come with silver catches.
These should be discarded in favor of the 113443-1 black catches.
b. Install Trim-Lok bulb seal (5) around perimeter of escape hatch panel (2).
c. Install one grab handle (6) onto escape hatch panel (2) and secure with two bolts (7),
four flat washers (8), and locknuts (9). Torque locknuts to 18 lb-ft.
INSTALLATION 3-172
JUNE 2005