M1070 HET ARMOR KIT
II113400
Rev. D
5. Install doghouse bottom panel as follows (see Figure 3-73):
a. Install original doghouse back-wall panel (retained from Doghouse Armor Installation Phase I,
b. Install doghouse bottom panel (1) and align the six left and right outer holes to the mounting studs.
c. Secure the doghouse bottom panel (1) by reinstalling six flat washers (2) and six locknuts (3) removed in
Step 1. Torque locknuts to 7 lb-ft.
d. Install eight bolts, (4), flat washers (5), and lock washers (6). Torque bolts to 7 lb-ft.
3
2
4
6
5
1
Original Back-wall Panel.
(Set in place. Do not fasten.)
Figure 3-73. Doghouse Bottom Panel Installation.
JUNE 2005