M1070 HET ARMOR KIT
II113400
Rev. D
a. Installation
1. Pre-assemble right mine blast panel as follows (see Figure 3-63):
a. Install one step joiner bracket (1) onto right mine blast panel (2) and secure with two flat washers (3) and
locknuts (4). Torque locknuts to 23 lb-ft.
b. Install two underbody stud plates (5) onto right mine blast panel (2) and secure each with
two flat washers (3) and locknuts (4). Torque locknuts to 23 lb-ft.
5
1
3
4
2
3
4
Figure 3-63. Right Mine Blast Panel Pre-Assembly.
JUNE 2005