M1070 HET ARMOR KIT
II113400
Rev. D
1. Install left side panel assembly as follows (see Figure 3-60):
NOTE
Repositioning of 90-degree joiner bracket may be required to provide adequate
clearance while mounting the left side panel assembly.
a. Using appropriate lifting device, hardware, and personnel, lift left side panel assembly into position onto
the cab and secure with 12 bolts (1). Torque bolts to 18 lb-ft.
b. Install four flat washers (2) and locknuts (3). Torque locknuts to 23 lb-ft.
c. Slide 90-degree joiner bracket firmly into position against cab frame rail and torque bracket locknuts to
23 lb-ft.
INSTALLATION 3-114
JUNE 2005