M1070 HET ARMOR KIT
II113400
Rev. D
a. Installation
1. Pre-assemble left firewall panel as follows (see Figure 3-56):
a. Install two lift brackets (1) onto left firewall panel (2) and secure the inboard side with one bolt (3), flat
washer (4), and locknut (5) and the outboard side with one bolt (7), flat washer (4), and locknut (5).
Torque locknuts to 35 lb-ft.
b. Re-install ether bottle brackets and fasteners as shown. Use two new locknuts (6) to hold the all-threads
on the backside of the firewall armor panel.
Figure 3-56. Left Firewall Panel Pre-Assembly.
JUNE 2005
