TB 9-2320-360-13&P-2
RIGHT BLAST DEFLECTOR REPLACEMENT - CONTINUED
0031 00
REMOVAL - CONTINUED
6.
Remove two locknuts (15), washers (16), and step joiner bracket (11) from right blast deflector (1). Discard locknuts.
7.
Remove four locknuts (13), washers (14), and two stud plates (12) from right blast deflector (1). Discard locknuts.
12
11
13,14
1
15,16
417-112
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
1.
Install two stud plates (12), four washers (14), and new locknuts (13) on right blast deflector (1). Tighten locknuts to 23
lb-ft (31 Nm).
2.
Install step joiner bracket (11), two washers (16), and new locknuts (15) on right blast deflector (1). Tighten locknuts to
23 lb-ft (31 Nm).
0031 00-3