TB 9-2320-360-13&P-2
LEFT BLAST DEFLECTOR REPLACEMENT - CONTINUED
0030 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Left side blast deflector weighs 134 lb (61 kg).
1.
Position lifting device under left blast deflector (18).
2.
Using lifting device, position left blast deflector (18) under vehicle.
3.
Install washer (6), bolt (5), bracket (9), washer (11), and new locknut (10) to left blast deflector (18).
4.
Using lifting device, install left blast deflector (18), eight washers (7), and new locknuts (8).
5.
Install four washers (2), bolts (1), washers (17), and new locknuts (16).
6.
Install washer (13), bolt (12), washer (3), and new locknut (4).
7.
Install washer (15) and bolt (14) on left blast deflector (18).
8.
Install left step (WP 0033 00).
END OF WORK PACKAGE
0030 00-3/(0030 00-4 Blank)