TB 9-2320-335-13&P
20-5. TRANSFER CASE GUIDE CABLE MAINTENANCE (SERIAL NUMBERS 300000 AND
ABOVE)
This task covers:
a. Removal
c. Installation
b. Inspection
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-387-24P
automotive (Appendix B, Item 1)
Maintenance Level
Materials/Parts
Direct support
Lockwasher (Appendix A, Item 174)
Locknut (Appendix A, Item 128)
Locknut (Appendix A, Item 102)
Locknut (Appendix A, Item 106)
a. Removal
1.
Remove locknut (6), washer (5), capscrew (17), washer (3), and washer (16) from muffler mounting
bracket (2) and guide cable bracket (4). Discard locknut (6).
2.
Remove locknut (13) and guide cable bracket (4) from capscrew (15) on transfer case (1). Discard
locknut (13).
3.
Remove capscrew (7), lockwasher (8), washer (9), guide cable (10), and washer (11) from frame (14).
Discard lockwasher (8).
4.
Remove locknut (22), washer (21), guide cable (10), and washer (20) from stud (18) on crossmember
support bracket (19). Discard locknut (22).
b. Inspection
Refer to TM 9-2320-387-24-1 for nut insert (12) inspection and replacement.
c. Installation
1.
Install guide cable (10) and washer (20) on stud (18) on crossmember support bracket (19) with
washer (21) and locknut (22).
CAUTION
Use grade 5 torque value when installing capscrews into nut
inserts. Failure to do so may damage equipment or components.
2.
Install guide cable (10) and washer (11) on frame (14) with washer (9), lockwasher (8), and capscrew (7).
3.
Install guide cable bracket (4) on capscrew (15) on transfer case (1) with locknut (13).
4.
Install washer (16), washer (3), capscrew (17), washer (5), and locknut (6) on muffler mounting
bracket (2) and guide cable bracket (4).
20-8
