TB 9-2320-335-13&P
20-3.1. TRANSFER CASE REPLACEMENT (SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
8.
Install transfer case switch (5) on transfer case (1).
9.
Install coolant hoses (3) on transfer case (1) with two clamps (4).
10.
Install rear propeller shaft (2) on transfer case (1).
11.
Connect two leads (10) on transfer case switch leads (9) of transfer case switch (1).
12.
Install sender generator (6) on transfer case (1) and tighten nut (8).
13.
Install tie strap (7) on sender generator (6).
14.
Install shaft linkage (14) on transfer case lever (13) with washer (12) and cotter pin (11).
15.
Install front propeller shaft (20) on transfer case yoke (18) with two U-bolts (19), four washers (16),
and locknuts (17).
16.
Connect vent line (15) to transfer case (1).
17.
Install drain plug (21) on transfer case (1). Tighten drain plug (21) to 35 lb-ft (47 Nm).
20-6