TB 9-2320-335-13&P
6-2. FRONT PROPELLER SHAFT ASSEMBLY MAINTENANCE (Cont'd)
c. Installation
1.
Position front propeller shaft assembly (4) over exhaust pipe (10) and over top of transfer case (5).
2.
Install front propeller shaft assembly (4) on differential pinion yoke (1) with two bearing straps (2)
and four capscrews (3). Tighten capscrews (3) to 13-18 lb-ft (18-24 Nm).
3.
Install center bearing (17) on engine mount (19) with two washers (16), capscrews (18), washers (16),
and locknuts (15). Tighten capscrews (18) to 60 lb-ft (81 Nm).
4.
Install transfer case shift rod (12) on transfer case shift lever (6) with washer (13) and cotter pin (14).
5.
Install front propeller shaft assembly (4) on transfer case output yoke (9) with two U-bolts (11), four
lockwashers (8), and nuts (7). Tighten nuts (7) to 13-18 lb-ft (18-24 Nm).
6-4