TB 9-2320-335-13&P
5-17.1. SENDER GENERATOR (ELECTRONIC) REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-387-24-1
automotive (Appendix B, Item 1)
TB 9-2320-335-13&P, Appendix E
Materials/Parts
Equipment Condition
Two tiedown straps (Appendix A, Item 324)
Battery cables disconnected (TM 9-2320-387-24-1).
Maintenance Level
Unit
a. Removal
1.
Remove tiedown strap (9) and shielding sleeve (10) from sender generator (4). Discard tiedown
strap (9).
2.
Remove tiedown strap (8) and excess wiring (3) from sender generator (4). Discard tiedown strap (8).
3.
Disconnect speedometer harness connector (1) from sender generator harness connector (2).
4.
Remove sender generator (4) from pinion adaptor (5) on transfer case (6).
NOTE
Sender generator drive tang can be removed if necessary to replace.
5.
Remove sender generator drive tang (7) from sender generator (4).
b. Installation
NOTE
Place any excess wiring inside sender generator shielding sleeve.
1.
Install sender generator tang (7) in sender generator (4).
2.
Install sender generator (4) on pinion adapter (5) on transfer case (6).
3.
Connect speedometer harness connector (1) to sender generator harness connector (2).
4.
Install excess wiring (3) on sender generator (4) with tiedown strap (8).
5.
Install shielding sleeve (10) on sender generator (4) with tiedown strap (9).
5-8
