TB 9-2320-335-13&P
5-17.2. SPEEDOMETER DRIVEN GEAR (ELECTRONIC) REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-387-10
automotive (Appendix B, Item 1)
TM 9-2320-387-24P
Maintenance and repair shop equipmentL
Equipment Condition
automotive (Appendix B, item 2)
Sender generator (electronic) removed
Materials/Parts
O-ring (Appendix G, Item 219)
Maintenance Level
Unit
a. Removal
1.
Remove capscrew (2) and clamp (3) from pinion adapter (1) and transfer case (6).
2.
Pull pinion adapter (1) out of transfer case (6).
3.
Remove O-ring (4) from pinion adapter (1). Discard O-ring (4).
4.
Remove driven gear (5) from transfer case (6).
b. Installation
1.
Install O-ring (4) on pinion adapter (1).
2.
Install driven gear (5) into pinion adapter (1).
3.
Install and align pinion adapter (1) into transfer case (6) with clamp (3) and capscrew (2). Tighten
capscrew (2) to 15 lb-ft (20 Nm).
5-10