TB 9-2320-335-13&P
4-14.1. INSTRUMENT CLUSTER (ELECTRONIC) REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Speedometer/odometer (electronic) removed
automotive (Appendix B, Item 1)
Manual References
Maintenance Level
TM 9-2320-387-10
Unit
TB 9-2320-335-13&P, Appendix E
NOTE
Prior to removal, tag leads for installation.
a. Removal
1.
Remove capscrew (12), grounds 58M (13) and 57G (14), and washer (15) from instrument cluster (18).
2.
Disconnect harness leads 36A (1), 567A (2), 40C (3), 57L (5), 17B (6), 27G (7), 33A (8), 27J (22),
40W (23), 28A (21), and 27W (24) from instrument cluster (18).
3.
Remove four nuts (9), (11), (17) and (20), and ground wires 58E (4), 58F (10), 58G (16), and 58H (19)
from instrument cluster (18).
b. Installation
1.
Install four nuts (9), (11), (17) and (20), and ground wires 58E (4), 58F (10), 58G (16), and 58H (19)
on instrument cluster (18).
2.
Connect harness leads 36A (1), 567A (2), 40C (3), 57L (5), 17B (6), 27G (7), 33A (8), 27J (22),
28A (21), 40W (23), and 27W (24) to instrument cluster (18).
3.
Install capscrew (12), grounds 58M (13) and 57G (14) and washer (15) on instrument cluster (18).
4-2