TB 9-2320-302-13&P-3
CONDENSER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Tag, Marker (Item 13, WP 0025 00)
Direct Support
Locknut (4)
Tools and Special Tools
O-ring (2)
Tool Kit, General Mechanic's (Item 9, WP 0024 00)
Personnel Required
Two
Shop Equipment, Common No. 1 (Item 6, WP 0024
References
Reclaimer, Refrigerant (Item 5, WP 0024 00)
Equipment Conditions
Tool Kit, Refrigeration Equipment (Item 10, WP
Vehicle parked on level ground (TM 9-2320-363-
10)
Wrench Set, Torx (Item 11, WP 0024 00)
Parking/Emergency Brake applied (TM 9-2320-
363-10)
Materials/Parts
Engine OFF (TM 9-2320-363-10)
Oil, Lubricating, Refrigerant Compressor (Item 8,
Ignition Key Switch in OFF position (TM 9-2320-
363-10)
A/C Refrigerant recovered (WP 0015 00)
Rag, Wiping (Item 9, WP 0025 00)
WARNING
Contact with refrigerant can cause frostbite. Keep hands and face away to prevent personal injury.
Protective face shield must always be worn when refrigerant lines are opened, even if the gauges indi-
cate the system is empty.
Always use caution if a fitting is removed. Slowly loosen the fitting. If the system is still under any
pressure, release it slowly in a well-ventilated area.
DO NOT smoke when servicing A/C or wherever refrigerant gas may be present.
Failure to follow these warnings may result in injury or death to personnel.
CAUTION
Cap all A/C hose ends and component connections during removal to protect against contamination. Failure
to comply may cause damage to equipment.