TB 9-2320-302-13&P-2
4.) Reconnect the work light connector that was removed in the earlier preparation
process.
OEM GRAB RAIL RE-INSTALLATION (DRIVER SIDE ONLY):
Install the OEM Grab Rail (removed earlier during Vehicle Preparation) onto the
two 3/8" threaded studs on the Driver Side B-Pillar Armor Frame as shown. Use
provided 3/8" flat washers, lock washers, and hex nuts to secure the Grab Rail to
the frame.
Repeat this installation procedure for the Passenger Side B-Pillar Armor.
Repeat this installation procedure for the Passenger Side B-Pillar Armor.
ArmorWorks
0038 00-40