TB 9-2320-302-13&P-2
DOOR AND FRAME ASSEMBLY REPLACEMENT - CONTINUED
0012 00
INSTALLATION - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may cause injury or
death to personnel.
For proper threat protection, armor must be installed correctly into the armor frame. During installation,
ensure that the surface marked "STRIKE FACE" is facing outward towards the threat. Exposing the
passive side of the ballistic panel outward makes the armor less effective. Failure to follow this warning
may cause injury or death to personnel.
7.
Attach a sling to armored door (10).
8.
Attach lifting device to sling on armored door (10).
9.
Using lifting device, hold armored door suspended and align hinge on armored door (10) to door frame assembly (5) and
install hinge pin (11).
10.
Remove lifting device from sling on armored door (10).
11.
Remove sling from armored door (10).
5
1,2,3,4
10
6,7,8,9
11 (HIDDEN)
12,13,14
440-011
1,2,3,4
0012 00-5
