Freightliner M915 / M916 -
Installation Manual P/N 0257550622-00
Crew Protection Kit
(Doc No.: II113500-1 D)
Fasteners:
Find No.
Description
Size
Quantity
6
Bolt
5/16" x 1-1/2" NC
6
26
Flat washer
5/16" x 21 x 3
48
2
Bolt
5/16" x 3/4" NC
19
3
Bolt
5/16" x 1" NC
16
10
Bolt
5/16" x 2-1/2" NC
3
8
Bolt
5/16" x 1-3/4" NC
4
Special Tools/ Materials
Description:
Vendor/Part-Number:
Telescopic Stand
0257550008-00
IMPORTANT
Before installation, pull out the side lamps' electrical wiring through the holes in items #802
and #803, accordingly.
5.8.2 Installation Instructions
1. Raise overlap #802 in to position as shown in Figure 5-33.
2. Pull the overhead light wires through the corresponding hole in overlap #802. Ensure that
the wires remain accessible for reattachment of the interior lights at a later time.
3. Start the fasteners in the lower three holes. Thread them in only enough to retain #801 on
the side armor panel. Do not tighten the fasteners at this time.
4. Repeat the above three steps on the left side with overlap #803.
Page 46 of 125