Freightliner M915 / M916 -
Installation Manual P/N 0257550622-00
Crew Protection Kit
(Doc No.: II113500-1 D)
Fasteners:
Find No.
Description
Size
Quantity
3
Bolt
5/16" x 1 NC
25
6
Bolt
5/16" x 1-1/2" NC
8
26
Flat washer
5/16" x 21 x 2.2
33
28
Cone washer
5/16"
3
12
Bolt counter sunk
5/16" x 1" NC
3
Special Tools/ Materials
Description:
Vendor/Part-Number:
None
5.7.2 Installation Instructions
1. Place Panel #844 against the aft cabin wall, left corner, as shown in Figure 5-28. Align the
left rear B-pillar #826. Install fasteners through the B-pillar and into the rear and side panel
as shown. Do not torque fasteners at this time, as it may be necessary to adjust the panel
positions slightly to align other components.
2. Place panel #205 against the aft cabin wall, right corner, as shown in Figure 5-29. Note that
panel #205 will overlap panel #844 in the center. Align the right rear B-pillar #827. Install
fasteners through the B-pillar and into rear and side panel as shown. Do not torque the
fasteners at this time.
3. Install counter-sunk washers and screws (items 12 and 28) to connect the panels at the
center joint.
4. Install brackets, #980, #983, #984 and #987 in locations as shown in Figure 5-27. Secure
with bolts and washers as defined in Figure 5-30.
Page 43 of 125