TB 9-2320-302-13&P-1
DOOR LATCH ADJUSTMENT - CONTINUED
0016 00
ADJUSTMENT
N OT E
The latch can be centered in up/down direction by loosening three bolts (2). The latch can be centered in the
in/out direction by loosening three bolts (4).
1.
Loosen three bolts (2) and adjust latching mechanism (3) until striker is centered in the latching mechanism.
N OT E
Latch must be centered so that it contacts both the upper and lower dovetails on the striker mounting plate at
approximately the same time.
2.
Loosen three bolts (4) and adjust door latch bracket
(1) until striker is centered in the latching mechanism.
3
3.
Repeat steps 1 and 2 as required to ensure correct
operation of latching mechanism.
4.
Install door panel (WP 0014 00).
2
4
1
417-275
END OF WORK PACKAGE
0016 00-2