TB 9-2320-302-13&P-1
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
Location
Item To
Check/
Item
Not Fully Mission
No.
Interval
Procedure
Capable If:
Service
REAR AND
RIGHT
SIDE
5
Before
Rear Cab
a. Inspect rear cab armor panels for Any panel or armor plate is damaged,
Armor
damage or loose or missing mounting bent out of shape, misaligned, loose or
hardware.
missing, or mounting bolts are loose or
missing.
b. Inspect rear cab armor panels for Any corrosion where area is unsound
areas of rust or corrosion.
and small pin holes are present, or a
rusted through condition is present.
c. Inspect rear cab armor panels for Any cracks that are longer than 1" or
cracks near or elongation of bolt two consecutive bolt holes that are elon-
holes.
gated.
d. Inspect rear cab armor panels for any Any complete penetration of the armor
holes or gouges.
(hole in the armor) or multiple gouges
1/4" or deeper within 3" of each other.
e. Inspect escape hatch ballistic glass Any ballistic glass mounting hardware
mounting hardware for damage, is damaged, loose, or missing, or
loose, or missing mounting hardware. mounting bolts are loose or missing.
f. Inspect interior surface of escape
Rock chips, cracks with spider webbing,
hatch ballistic glass for rock chips,
scratches, pitting, or hits in the exterior
cracks, scratches, pitting, any hits that
layer of ballistic glass that expose glass
expose glass below the first layer,
below the first layer, cloudiness that
cloudiness, or any stickers that impair
impairs vision.
vision.
g. Exit vehicle and inspect exterior sur-
Rock chips, cracks with spider webbing,
face of escape hatch ballistic glass for
scratches, pitting, or hits in the exterior
rock chips, cracks, scratches, pitting,
layer of ballistic glass that expose glass
any hits that expose glass below the
below the first layer, cloudiness that
first layer, cloudiness, or any stickers
impairs vision.
that impair vision.
0009 00-8
