TB 9-2320-302-13&P-1
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
Location
Item To
Check/
Item
Not Fully Mission
Service
No.
Interval
Procedure
Capable If:
2
Before
Side Armor a. Inspect A-pillar armor panels for Any panel or armor plate is damaged,
(Left Side)
damage or loose or missing mounting bent out of shape, misaligned, loose or
hardware.
missing, or mounting bolts are loose or
missing.
b. Inspect A-pillar armor panels for Any corrosion where area is unsound
areas of rust or corrosion.
and small pin holes are present, or a
rusted through condition is present.
c. Inspect A-pillar armor panels for Any cracks that are longer than 1" or
cracks near or elongation of bolt two consecutive bolt holes that are elon-
holes.
gated.
d. Inspect A-pillar armor panels for any Any complete penetration of the armor
holes or gouges.
(hole in the armor) or multiple gouges
1/4" or deeper within 3" of each other.
e. Inspect door ballistic glass mounting Any ballistic glass mounting hardware
hardware for damage, loose, or miss- is damaged, loose, or missing, or
ing mounting hardware.
mounting bolts are loose or missing.
f. Inspect exterior surface of door ballis-
Rock chips, cracks with spider webbing,
tic glass for rock chips, cracks,
scratches, pitting, or hits in the exterior
scratches, pitting, any hits that expose
layer of ballistic glass that expose glass
glass below the first layer, cloudiness,
below the first layer, cloudiness that
or any stickers that impair vision.
impairs vision.
g. Inspect fender armor and support for Any panel or armor plate is damaged,
damage or loose or missing mounting bent out of shape, misaligned, loose or
hardware.
missing, or mounting bolts are loose or
missing.
h. Inspect fender armor and support for Any corrosion where area is unsound
areas of rust or corrosion.
and small pin holes are present, or a
rusted through condition is present.
i. Inspect fender armor and support for Any cracks that are longer than 1" or
cracks near or elongation of bolt two consecutive bolt holes that are elon-
gated.
holes.
j. Inspect fender armor and support for Any complete penetration of the armor
(hole in the armor) or multiple gouges
any holes or gouges.
1/4" or deeper within 3" of each other.
k. Open door and enter cab. Close door Door binds or does not lock.
using grab handle. Make sure door
closes without binding and locks cor-
rectly (WP 0004 00).
l. Make sure door ballistic glass can Door ballistic glass will not close or
lock.
open, close, and securely lock.
0009 00-4