TB 9-2320-302-13&P-1
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
Location
Item To
Check/
Item
Not Fully Mission
Service
No.
Interval
Procedure
Capable If:
FRONT
AND LEFT
SIDE
1
Before
Front Armor a. Inspect front and cowl armor panels Any panel or armor plate is damaged,
for damage or loose or missing bent out of shape, misaligned, loose or
mounting hardware.
missing, or mounting bolts are loose or
missing.
b. Inspect front and cowl armor panels Any corrosion where area is unsound
for areas of rust or corrosion.
and small pin holes are present, or a
rusted through condition is present.
c. Inspect front and cowl armor panels Any cracks that are longer than 1" or
for cracks near or elongation of bolt two consecutive bolt holes that are elon-
holes.
gated.
d. Inspect front and cowl armor panels Any complete penetration of the armor
for any holes or gouges.
(hole in the armor) or multiple gouges
1/4" or deeper within 3" of each other.
e. Inspect windshield ballistic glass Any ballistic glass mounting hardware
mounting hardware for damage, is damaged, loose, or missing, or
loose, or missing mounting hardware. mounting bolts are loose or missing.
f. Inspect exterior surface of wind-
Rock chips, cracks with spider webbing,
shield ballistic glass for rock chips,
scratches, pitting, or hits in the exterior
cracks, scratches, pitting, any hits that
layer of ballistic glass that expose glass
expose glass below the first layer,
below the first layer, cloudiness that
cloudiness, or any stickers that impair
impairs vision.
vision.
g. If dirty, clean windshield ballistic
glass (WP 0010 00).
0009 00-2