TB 9-2320-279-13&P-4
FIELD MAINTENANCE
WINCH REMOTE DOES NOT OPERATE PROPERLY
INITIAL SETUP:
Tools and Special Tools
Parking brake applied (refer to TM 9-2320-279-10).
Tool Kit, General Mechanic's: Automotive (WP
Wheels chocked (refer to TM 9-2320-279-10).
0081, Table 2, Item 5)
Wrench, 18 in. Adjustable (WP 0081, Table 2,
Item 6)
Personnel Required
Wheeled Vehicle Mechanic 63B (2)
Equipment Condition
Engine OFF (refer to TM 9-2320-279-10).
TROUBLESHOOTING PROCEDURE
WINCH REMOTE DOES NOT OPERATE PROPERLY
TEST 1 - Does winch operate with manual controls?
CAUTION
Do not let cable end run into heavy-duty winch while reeling IN, or damage to equipment
will result.
1. Pull selector valve out. (WP 0015)
2. Push WINCH KICKOUT control valve in to ENGAGE position. (WP 0015)
WARNING
Excessive noise levels are present any time the heavy-duty winch, crane, or retrieval system
is operating. Wear single hearing protection (earplugs or equivalent) while working around
equipment when it is running. Failure to comply may result in injury or death to personnel.
Seek medical aid should you suspect a hearing problem.
3. Start engine (refer to TM 9-2320-279-10).
4. Set PTO ENGAGE switch to ON position. (WP 0015)
5. Prepare vehicle for heavy-duty winch operation. (WP 0015)
0033-1
