TB 9-2320-279-13&P-2
HEADLIGHT AND COMPOSITE LIGHT REPLACEMENT - CONTINUED
0021 00
INSTALLATION (CONFIGURATION A)
N OT E
The following procedure covers both left and right headlight assemblies (Configuration A).
Left headlight assembly (Configuration A) is illustrated.
1.
Position headlight bracket (10) over mounting holes on lower brush guard.
2.
Install two washers (2) and bolts (1) in top of headlight bracket (10).
3.
Install three washers (8) and new locknuts (9) in bottom of headlight bracket (10).
4.
Install front composite light (12), five washers (14), bolts (13), washers (3), and new locknuts (4) in headlight bracket
(10).
5.
Install headlight (11), three washers (7) and new locknuts (6) on headlight bracket (10).
6.
Connect jumper harness connectors (5) to headlight (11) and front composite light (12).
5
4
3
2
1
14
13
6
7
12
8
417-132
10
11
9
7.
If equipped, turn battery disconnect switch to ON position (TM 9-2320-364-10).
8.
Check operation of headlights and front composite lights (TM 9-2320-364-10).
END OF WORK PACKAGE
0021 00-5/(0021 00-6 Blank)