TB 9-2320-279-13&P-2
ESCAPE HATCH ASSEMBLY MAINTENANCE - CONTINUED
0023 00
DISASSEMBLY - CONTINUED
3.
Remove eight locknuts (9), washers (10), bolts (13), washers (14), and four escape hatch brackets (11) from roof.
Discard locknuts.
4.
Remove four bolts (16), washers (15), and keeper pins (12) from four escape hatch brackets (11).
9
10
16
15
11
14
12
13
417-018
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
ASSEMBLY
CAU T I ON
Do not overtighten draw latch component mounting hardware, or damage to draw latch components may result.
1.
Install four keeper pins (12) on four escape hatch brackets (11) with four washers (15) and bolts (16). Tighten bolts to 36
lb-in. (4 Nm).
2.
Install four escape hatch brackets (11) to roof with eight washers (14), bolts (13), washers (10), and new locknuts (9).
0023 00-3
