TB 9-2320-279-13&P-2
HEADLIGHT AND COMPOSITE LIGHT REPLACEMENT - CONTINUED
0021 00
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION (CONFIGURATION B)
N OT E
The following procedure covers both left and right headlight assemblies (Configuration B).
Left headlight assembly (Configuration B) is illustrated.
1.
Position headlight bracket (10) over mounting holes on lower brush guard.
2.
Install two washers (2) and bolts (1) in top of headlight bracket (10).
3.
Install three washers (8) and new locknuts (9) in bottom of headlight bracket (10).
4.
Install headlight adapter (12), five washers (15), bolts (14), washers (3), and new locknuts (4) in headlight bracket (10).
5.
Install front composite light (13), two washers (16), and bolts (17) in headlight adapter (12).
6.
Install headlight (11), three washers (7) and new locknuts (6) in headlight bracket (10).
7.
Connect jumper harness connectors (5) to headlight (11) and front composite light (13).
5
4
3
2
1
17
16
15
14
6
7
8
13
12
11
9
10
417-133
8.
If equipped, turn battery disconnect switch to ON position (TM 9-2320-364-10).
9.
Check operation of headlights and front composite lights (TM 9-2320-364-10).
0021 00-4