TB 9-2320-279-13&P-2
DOOR ASSEMBLY REPLACEMENT - MODEL B - CONTINUED
0015 01
REMOVAL
1.
Remove two bolts (8) and washers (9) from door stop (5).
2.
Remove two bolts (6), washers (7), and door stop (5) from side of vehicle.
3.
Unlatch door and attach sling and lifting device to lifting link (3) at top of door assembly (4).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
N OT E
Door assembly weighs 336 lb (153 kg).
4.
Using lifting device, remove five bolts, (1), washers (2), and door assembly (4) from door hinge (10).
5.
Place door assembly (4) on flat surface and remove sling and lifting device.
6.
Remove three bolts (11), washers (12), and hinge (10) from side of vehicle.
3
1,2
11,12
4
10
8,9
6,7
5
440-055
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
Change 1
0015 01-2
