TB 9-2320-279-13&P-2
CLEANING BALLISTIC GLASS
THIS WORK PACKAGE COVERS
Cleaning
INITIAL SETUP
Equipment Conditions
Maintenance Level
Vehicle parked on level ground (TM 9-2320-279-
Operator
10)
Materials/Parts
Parking/Emergency Brake applied (TM 9-2320-
Detergent (Item 4, WP 0035 00)
279-10)
Rag, Wiping (Item 7, WP 0035 00)
Engine off (TM 9-2320-279-10)
If equipped, Battery Disconnect Switch in OFF
position (TM 9-2320-279-10)
CLEANING
CAU T I ON
Remove rings or other hard objects from hands before cleaning ballistic glass. DO NOT use hard, dirty,
or gritty cloths on ballistic glass. DO NOT apply water or detergent unless ballistic glass is cool and is
protected from heating effects of sunlight. Failure to follow these instructions will damage ballistic
glass.
Do not use bug spray or other aerosol sprays on or near ballistic glass. Failure to follow these instruc-
tions will damage ballistic glass.
N OT E
Follow this procedure to clean inner plastic laminate surfaces of ballistic glass. Clean outside surfaces of
ballistic glass as you would clean plain glass.
1.
Add detergent (as directed by manufacturer) to 1 gal. (3.8 L) of water.
2.
Saturate a soft, clean cloth with cleaning solution and lightly rub plastic surfaces.
3.
Flush off cleaning solution with water and dry with a soft, clean cloth.
END OF WORK PACKAGE
0010 00-1/(0010 00-2 Blank)