TB 9-2320-279-13&P-2
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
LOCATION
ITEM TO
CHECK/
ITEM
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
PROCEDURE
CAPABLE IF:
6
Before
Side Armor a. Inspect side armor panels and door Any side armor panel or door assembly
assembly for damage or loose or is damaged or mounting hardware is
(Right Side)
loose or missing.
missing mounting hardware.
b. Inspect exterior surface of door ballis- Pitting, cracks, or scratches exist in the
tic glass for pitting, cracks, or exterior layer of door ballistic glass and
penetrate through to the inner layer.
scratches.
c. Open door and enter cab. Close door Door binds or does not lock.
using grab handle. Lock door with
lock pin. Make sure door closes with-
out binding and locks correctly (WP
d. Ensure door ballistic glass can open, Door ballistic glass will not close or
close, and securely lock.
lock.
e. Inspect interior surface of door ballis- Pitting, cracks, or scratches exist on the
tic glass and windshield ballistic glass interior surface of the door ballistic
glass or windshield ballistic glass.
for pitting, cracks, or scratches.
f. If dirty, clean door ballistic glass (WP
DOOR BALLISTIC
GLASS
FRONT SIDE
ARMOR
REAR SIDE
ARMOR
417-046
0009 00-6