W A R N I N G
Axle housing is heavy and can injure personnel if dropped. Support axle
housing during removal.
Procedure is the same for all rear axles except where noted.
DISCONNECT TWO AIR LINES (1) FROM BRAKE CHAMBER (2).
Note position of spider assembly prior to removal to aid in installation.
REMOVE EIGHT LOCK NUTS (3), EIGHT WASHERS (4), EIGHT SCREWS (5), EIGHT WASHERS
(6), AND SPIDER ASSEMBLY (7) FROM AXLE HOUSING (8). DISCARD LOCK NUTS.
REPEAT STEPS 1 AND 2 FOR OPPOSITE SIDE OF AXLE HOUSING (8).