REAR-REAR AXLE DIFFERENTIAL CARRIER REPLACEMENT (CONT)
Rear-rear axle differential carrier weighs 860 lb (390 kg), Attach suitable floor
jack prior to installation to prevent possible injury to personnel.
If axle assembly has been removed from vehicle, perform steps 2 thru 6 only.
INSTALL DIFFERENTIAL CARRIER (1) ON FLOOR JACK AND ROLL DIFFERENTIAL CARRIER (1)
INTO POSITION UNDER VEHICLE.
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing, To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or clothing, wash immediately with
soap and water.
Make sure both mating surfaces have been completely cleaned to prevent
damage to equipment.
APPLY 1/8-lN. BEAD OF SEALING COMPOUND AROUND ENTIRE MATING SURFACE OF AXLE (2).