TM 9-2320-363-34-1
NOTE
If reinstalling axle, perform step 3. If installing new axle, perform step 4.
3.
INSTALL TORQUE ROD (8), ANY SPACER(S) (9), TWO WASHERS (10), TWO SCREWS (11), TWO
WASHERS (12), AND TWO NEW LOCK NUTS (13). TIGHTEN LOCK NUTS TO 120-152 LB-FT
(163-206 N.m).
4.
INSTALL TORQUE ROD (8), TWO WASHERS (10), TWO SCREWS (11), TWO WASHERS (12), AND
TWO NEW LOCK NUTS (13). HAND-TIGHTEN LOCK NUTS.
5.
INSTALL SPIDER ASSEMBLY (14), EIGHT WASHERS (15), EIGHT SCREWS (16), EIGHT WASHERS
(17), AND EIGHT NEW LOCK NUTS (18) ON AXLE HOUSING (19). TIGHTEN LOCK NUTS TO
135-145 LB-FT (183-197 N.m).
6.
CONNECT TWO AIR LINES (20) IN BRAKE CHAMBER (21).
NOTE
Follow-on Maintenance:
If new axle installed, adjust plane of axle (TM 9-2320-363-20).
Install rear brakeshoes and linings (TM 9-2320-363-20).
Fill axle with oil (TM 9-2320-363-20).
Install rear Anti-Lock Brake System (ABS) sensors (TM 9-2320-363-20).
Change 1
6-21