TM 9-2320-302-34
0103 00-1
REAR SUSPENSION CONTROL ROD AND V-ROD REPLACEMENT
0103 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanics (Item 132, WP 0126 00)
Jack, hydraulic (Item 73, WP 0126 00)
Trestle, hoist, portable (2) (Item 135, WP 0126 00)
Tools and Special Tools - Continued
Wrench, torque, 50-250 lb-ft (Item 139, WP 0126 00)
Wrench, torque, 100-600 lb-ft (Item 140, WP
0126 00)
Wrench set, socket, 3/4 in drive (Item 141, WP
0126 00)
Personnel Required
Two
REMOVAL
NOTE
To remove control rods, perform steps 1 and 2.
To remove V-rods, perform steps 1 and 3.
1.
Using floor jack, lift rear of vehicle and place a trestle under each frame rail. Lower vehicle onto trestles.
2.
Remove four nuts (1), screws (2), and two control rods (3) from vehicle.
3
3
2
1