TM 9-2320-302-34
0102 00-2
REAR SPRING ASSEMBLY REPLACEMENT - CONTINUED
0102 00
INSTALLATION
1.
Using a suitable lifting device, position rear spring assembly (4) to vehicle.
2.
Install rear suspension center bearing (WP 0101 00).
3.
Install top pad (2) to each of two axle clamps (3) with four screws (1). Tighten screws to 37 lb-ft (50 Nm).
4.
Install wheels (TM 9-2320-302-10).
5.
Tighten wheel lug nuts (TM 9-2320-302-20).
END OF WORK PACKAGE
2
1
1
3
4