TM 9-2320-302-34
0101 00-1
REAR SUSPENSION CENTER BEARING REPLACEMENT
0101 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanics (Item 132, WP 0126 00)
Jack, hydraulic (Item 73, WP 0126 00)
Trestle, hoist, portable (2) (Item 135, WP 0126 00)
Wrench, torque, 50-250 lb-ft (Item 139, WP 0126 00)
Materials/Parts
Screw (P/N 23-12576-125) (2)
Adhesive, loctite (Item 2, WP 0125 00)
Personnel Required
Two
REMOVAL
1.
Remove nut (1), screw (2), and rebound stop (3) from mounting bracket (4).
2.
Remove two screws (5) from center bearing (6).
3.
Using floor jack, lift rear of vehicle and place a trestle under each frame rail. Lower vehicle onto trestles.
4.
Remove two screws (7) and center bearing (6) from top of spring assembly (8). Discard screws.
1
4
3
2
5
7
6
7
8