TM 9-2320-283-10
1. With the spare still mounted in the tire carrier, run the end of the cable through
a wheel opening, wrap it around the tire and secure the snap back to the cable.
WARNING
The winch automatically brakes when pressure is taken off
the handle regardless of which direction it is being turned.
If slack is needed to secure the cable around the wheel
and tire, you must pull on the cable and turn the handle
in the counterclockwise (lower) direction at the same time.
Do not pay out more cable than is needed.
2. Remove tractor to trailer electrical cable at tractor.
3. Remove spare from the tire carrier by removing the wing nut and lowering the
carrier side panel. Then remove the bolt. The spare can then be lifted on the
side panel and moved out far enough to clear the truck for lowering.
4. Take up slack in the cable by turning the handle in the clockwise (raise) direc-
tion.
3-20