TM 9-2320-363-34-2
5.
USING FIBER OR PLASTIC MALLET, TAP REAR FACE OF GEAR HOUSING ASSEMBLY (8) TO
LOOSEN GEAR HOUSING ASSEMBLY FROM CYLINDER BLOCK (10). REMOVE GEAR HOUSING
ASSEMBLY (8).
6.
REMOVE AND DISCARD SEAL RING (11) FROM COUNTERBORE AT TOP CENTER FRONT FACE
OF CYLINDER BLOCK (10).
7.
REMOVE ALL OLD GASKET ELIMINATOR FROM MATING SURFACES OF GEAR HOUSING
ASSEMBLY AND CYLINDER BLOCK (10).
Use general cleaning methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
12-71
