TM 9-2320-363-34-2
WIRING HARNESS REPLACEMENT
This task covers:
a. Removal b. Cleaning c. Inspection d. Installation
Tools and Special Equipment:
Tool Kit, SC 5180-90-CL-N05
References:
TM 9-2320-363-20
Equipment Condition:
Reference
Condition Description
TM 9-2320-363-20
Batteries Disconnected
NOTE
Wiring harness and leads are secured in place by wire ties, cushion clamps,
and screw terminals.
Only remove hardware securing harness or lead to be removed.
DISCONNECT AND REMOVE WIRING HARNESS USING ILLUSTRATION AND TABLE AS A GUIDE.
Use general cleaning methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
NOTE
Wiring harness and leads are secured in place by wire ties, cushion clamps,
and screw terminals.
. Make sure harness is secure and all hardware is tight.
INSTALL AND CONNECT WIRING HARNESS USING ILLUSTRATION
AND TABLE AS A GUIDE.
25-34
