TM 9-2320-363-34-2
FLAME DETECTOR SWITCH REPLACEMENT AND ADJUSTMENT (CONT)
1.
INSTALL
SWITCH
COMPRESSION NUT (1) AND NEW
(3).
SLEEVE (2) ON FLAME
C A U T I O N
Flame detector switch contains a ceramic rod, and must not be bent during
installation to prevent damage to equipment.
2.
INSTALL FLAME DETECTOR SWITCH (3) AND COMPRESSION NUT (1) ON HEATER (4).
3.
CONNECT SIX WIRES (5) AND INSTALL FIVE NEW SEMS SCREWS (6) ON FLAME DETECTOR
SWITCH (3).
4.
INSTALL GUARD ASSEMBLY (7) AND FOUR SCREWS (8).
25-32
