TM 9-2320-363-34-2
7.
8.
9.
10.
11.
INSTALL PISTON ASSEMBLY (21) IN BRAKE ADAPTER (5) AND TAP PISTON ASSEMBLY (21)
UNTIL RESTING ON 12 SPRINGS (12).
INSTALL SPACER (22) AND FIVE DISC PLATES (23) ALTERNATING WITH FOUR DRIVE PLATES
(24) IN PISTON ASSEMBLY (21).
INSTALL BEARING (25) AND NEW PACKING (26) IN BRAKE HOUSING (27) AND INSTALL BRAKE
HOUSING (27) OVER PISTON ASSEMBLY (21) AND TWO DOWELS (13).
C A U T I O N
Tighten screws evenly to prevent binding and possible damage to drive plates
and disc plates.
INSTALL SIX NEW LOCK WASHERS (28) AND SIX SCREWS (29). TIGHTEN SCREWS EVENLY
UNTIL BRAKE HOUSING (27) COMPRESSES 12 SPRINGS (12) AND IS SEATED. TIGHTEN SIX
SCREWS (29) TO 45 LB-FT (61 N.m).
INSTALL PLUG (30) AND RELIEF VALVE (31) IN BRAKE ADAPTER (5).
NOTE
Follow-on Maintenance:
Install hydraulic winch (page 11-9).
23-41/(23-42 Blank)
