TM 9-2320-363-34-2
MOTOR END REPAIR (CONT)
1.
Inspect gear teeth on shafts, ring gears, sun gears and planetary gears for chips, uneven wear, or
damage. Replace if damaged.
2.
Replace springs if they will not return to 1-in. free length after being compressed to 3/4-in. length.
3.
If thickness of disc plates is less than 0.080 in. or disc plates are warped or bent, replace with new
part.
4.
If thickness of drive plates is less than 0.055 in. or drive plates will not slide freely on brake shaft,
replace with new part.
Use general repair methods to repair damaged parts (page 2-33).
23-38
