TM 9-2320-363-34-2
4.
INSTALL TWO NEW SEALS (13) IN HOUSING (14).
5.
INSTALL HOUSING (14).
NOTE
To make pocket seals, lay seal P/N 391-2884-050 into each pocket of plate for
which being made and cut to exact length using razor blade or sharp knife.
Install plates with pocket seals facing bearings.
6.
INSTALL PLATE (15) AND SIX NEW POCKET SEALS (16) ON HOUSING (14).
7.
IF REMOVED, INSTALL TWO NEW SEALS (17) AND FOUR NEW BEARINGS (18) IN CARRIER (19).
8.
INSTALL CARRIER (19).
9.
INSTALL SIX NEW POCKET SEALS (20), PLATE (21), SHAFT (22), AND TWO MATCHED GEARS
(23) IN CARRIER (19).
10. INSTALL TWO NEW SEALS (24) IN HOUSING (25).
11. INSTALL HOUSING (25).
12. INSTALL PLATE (26) AND SIX NEW POCKET SEALS (27) IN HOUSING (25).
13. IF REMOVED, INSTALL NEW SEAL (28) AND TWO BEARINGS (29) IN COVER (30).
14. INSTALL COVER (30) AND FOUR NUTS (31).
NOTE
Follow-on Maintenance:
Install hydraulic pump (page 11-2).
23-17
