TM 9-2320-363-34-2
HYDRAULIC PUMP REPAIR (CONT)
2.
IF REMOVED, INSTALL TWO NEW THREADED CHECK ASSEMBLIES (6), NEW SEAL (7), AND
TWO NEW BEARINGS (8).
NOTE
To make pocket seals, lay seal P/N 391-2884-050 into each pocket of plate for
which being made and cut to exact length using razor blade or sharp knife.
Install plates with pocket seals facing bearings.
3.
INSTALL SIX NEW POCKET SEALS (9), PLATE (10), SHAFT AND GEAR SET (11), AND FOUR
STUDS (12).
23-16
